Trying Out the Instrument
R&S
®
FSWP
62Getting Started 1177.5756.02 ─ 13
For pulsed measurements using the LO AUX input, do not apply pulses with
a frequency below 1024 MHz. Pulses below that frequency will abort the
measurement.
5.2.7 Adding Another Measurement Channel
Measuring the noise characteristics in two different measurement channels allows
you, for example, to capture and analyze two different data streams with different
measurement configurations.
Adding another measurement channel
1. Select the [MODE] key.
2. Select the "Phase Noise" item in the "Mode" dialog box.
The firmware adds a second instance of the phase noise application which is
independent of the first one.
5.3 Result Evaluation
The phase noise application provides several tools to control the data displayed
in the various result displays. Some tools have an effect on the graphical result
displays, other on the numerical results and still others on both graphical and
numerical (for example in case the numerical results are based on the graphical
results).
● Trace Smoothing.............................................................................................63
● Integration Ranges..........................................................................................65
● The Cross-Correlation Gain Indicator............................................................. 66
● Miscellaneous Evaluation Tools...................................................................... 67
Result Evaluation
To Next Page
Loading...
