Rohde & Schwarz FSWP - Device ID; Labels on R&S FSWP; Labels on R&SFSWP

Instrument Tour
R&S
®
FSWP
51Getting Started 1177.5756.02 ─ 13
4.2.14 Labels on R&S FSWP
Labels on the casing inform about:
●
Personal safety, see "Meaning of safety labels" on page 12
●
Product and environment safety, see Table 4-1
●
Identification of the product, see Chapter 4.2.15, "Device ID", on page 51
Table 4-1: Labels regarding R&S FSWP and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after
the product has come to the end of its service life. For more information, see the prod-
uct user manual, chapter "Disposal".
4.2.15 Device ID
The unique device identifier is provided as a barcode sticker on the rear panel of
the R&S FSWP.
It consists of the device order number and a serial number.
The serial number is used to define the default instrument name, which is:
<Type><variant>-<serial_number>
For example, FSWP26-123456.
The instrument name is required to establish a connection to the instrument
in a LAN.
The Rear Panel