Rohde & Schwarz R&S NRP-Z91 - Page 41

Program module "Terminal" R&S NRP-Z91
1168.8579.12 3.2 E-1
Fig. 3-2 Sending commands using command files
Table 3-1 Buttons assigned to the Input field
Button Function Key combination
Send
Sends the content of the Input entry field to the sensor.
Alt + S
Loop
With Loop the command or command sequence is cyclically sent. Pressing
the button again terminates the cyclic transmission. The repetition rate is set
in a dialog window that can be opened with View - Loop...
Alt + L
Clear
Clears the content of the Input field.
Alt + R
Font key
Opens a dialog window where the font for the Input field can be selected.
Colour key
Opens a dialog window where the background colour of the Input field can
be selected.
Table 3-2 Buttons assigned to the Command File field
Button Function Key combination
Send Sends the content of the command file to the sensor. Alt + E
Loop
With Loop the command or command sequence is cyclically sent. Pressing
the button again terminates the cyclic transmission. The repetition rate is set
in a dialog window that can be opened with View - Loop...
Alt + O
History
Opens a window for editing the command file name in the Command File
field.
Alt + H
Edit Opens the selected command file in the Windows™ text editor. Alt + D
… Opens a file opening dialog for selecting the command file.