R&S NRP-Z91 Remote Control – Fundamentals
1168.8579.12 5.1 E-1
5 Remote Control – Fundamentals
Rohde & Schwarz recommends to utilize the VXI Plug & Play Driver for the remote control of R&S NRP
power sensors. This driver can be found on the CD-ROM supplied with the sensor or downloaded in its
most recent version via the internet (http://rohde-schwarz.com/).
The old remote control interface provided by the Dynamic Link Library NrpControl.dll is not developed
further, but remains on the CD-ROM and can be downloaded via the internet.
To Next Page
Loading...
