Sample Application
R&S
®
SFE100
40Getting Started 2112.4122.62 ─ 13
Selecting the transport stream input and setting the DVB-C transmission param-
eters
1. In the tree, select the
"DIGITAL TV" menu.
2. Press the ENTER key.
The tree is expanded and the "DIGITAL TV" submenu is displayed.
(See Figure 8-1.)
3. In the tree, select the "INPUT SIGNAL" submenu.
4. Press the ENTER key.
The focus is set on the work view.
Figure 8-1: DIGITAL TV menu
5. Select the "EXTERNAL" signal source.
a) Select the "SOURCE" field.
b)
Press the ENTER key to display the list.
c) Select "EXTERNAL".
d) Press the ENTER key to confirm the selection.
6. Select the "ASI 1" input.
a) Select the "INPUT" field.
b) Press the ENTER key to display the list.
c) Select "ASI 1".
d) Press the ENTER key to confirm the selection.
To Next Page
Loading...
