Improving Level Performance
R&S
®
SMA100B
209User Manual 1178.3834.02 ─ 05
2. Select "Import/Export".
Figure 7-3: Im-/Export dialog (example with UCOR settings)
The "Import/Export" dialog contains all functions and settings to import externally
created list data or to export it accordingly. You can process and store a list in the
formats *.txt (ASCII), or *.csv (plain text with identical sequence of fields). The
table separators and the decimal floating point numbers are customizable.
Settings
Mode .......................................................................................................................... 209
ASCII File Settings......................................................................................................209
Select (ASCII) Source/Select (ASCII) Destination...................................................... 210
Select Source/Select ASCII Destination..................................................................... 210
Import / Export.............................................................................................................210
Mode
Selects import or export of a data list file. The provided parameters vary according to
the selected mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:MODE on page 624
[:SOURce<hw>]:CORRection:DEXChange:MODE on page 590
[:SOURce<hw>]:PULM:TRAin:DEXChange:MODE on page 538
ASCII File Settings
Defines the format and the separators of the associated data file.
"Extension"
Selects *.csv or *.txt format.
"Decimal
Point"
Sets "Point" (dot) or "Comma" as the decimal separator used in the
ASCII data with floating-point numerals.
User Correction
To Next Page
Loading...
