Safety Instructions
R&S
®
TLx9
10System Manual 2506.5060.02 ─ 03
tions on working with hazardous products (coolant) must be observed; see the sec-
tion "Material Safety Data Sheets" under "EC Safety Data Sheet – Antifrogen".
2.2 General Safety Instructions
This section contains general safety instructions applying to all products manufactured
or sold by Rohde & Schwarz.
In line with IEC215 or EN60215, transmitter systems and their add‑on equipment must
be operated under the responsibility of qualified technicians only. The minimum
requirements for qualified electricians are also defined in the standard "Safety require-
ments for radio transmitting equipment".
Compliance with all legal and regulatory requirements is a precondition for operating
radio equipment and systems. The operator and/or the operator's authorized represen-
tative is responsible for ensuring compliance with these requirements. They must addi-
tionally ensure that the training of the operating personnel satisfies the specific require-
ments of the respective country
. This includes any periodic training that is necessary.
2.2.1 Basic Safety Instructions
It is essential to read and observe the following instructions and safety informa-
tion.
All plants and locations of the Rohde & Schwarz group of companies make every effort
to keep the safety standards of our products up to date and to offer our customers the
highest possible degree of safety. Our products and the auxiliary equipment that they
require are manufactured and tested in line with the applicable safety standards. Com-
pliance with these standards is continuously monitored by our Quality Assurance
department. The product described here has been manufactured and tested in accord-
ance with the enclosed EC Certificate of Conformity and left the manufacturer's plant in
a condition fully complying with the relevant safety standards. To maintain this condi-
tion and to ensure safe operation, you must observe all information, warnings and
instructions provided in this manual. Please do not hesitate to contact the
Rohde & Schwarz group of companies if you have any queries regarding these safety
instructions.
Furthermore, it is your responsibility to use the product in an appropriate manner. This
product is designed for use solely in industrial and laboratory environments or, if
expressly permitted, also in the field and must not be used in any way that may cause
personal injury or property damage. You are responsible if the product is used for any
purpose other than its designated purpose or in disregard of the manufacturer's
instructions. The manufacturer shall not be liable for any consequences resulting from
the product being used for purposes other than those for which it is intended.
The product is used for its designated purpose if it is used in accordance with its prod-
uct documentation and within its performance limits (see data sheet, documentation
and the following safety instructions). Using the product requires technical skills and a
General Safety Instructions
To Next Page
Loading...
