Rohde & Schwarz TLx9 Series - RF Switch Board; A.2.6 RF Switch Board

R&S TLx9 Interface Description
R&S
®
TLx9
82System Manual 2506.5060.02 ─ 03
A.2.6 RF Switch Board
Table A-44: X60A - RF IN/OUT: SMA socket 50
Ω
Signal
Name/Description
Direction Value range Connection
point
Remarks
X60A Bidirectional P
AVG, max.
< 20 W
174 MHz to 790 MHz
at 50 Ω load, s < 1.4
X60A.1 This port can be
used as input
from TX_A in a
TX 1+1 system
or as an output to
TX_A in a single
or antenna 1+1
system.
GND Bidirectional X60A.2 GND / shield
Table A-45: X60B - RF IN/OUT: SMA socket 50
Ω
Signal
Name/Description
Direction Value range Connection
point
Remarks
X60B Bidirectional P
AVG, max.
< 20 W
174 MHz to 790 MHz
at 50 Ω load, s < 1.4
X60B.1 This port can be
used as output to
Antenna_A in a
TX 1+1 system
or as an input
from Antenna_A
in a single or
antenna 1+1 sys-
tem.
GND Bidirectional X60B.2 GND / shield
Table A-46: X60C - RF IN/OUT: SMA socket 50
Ω
Signal
Name/Description
Direction Value range Connection
point
Remarks
X60C Bidirectional P
AVG, max.
< 20 W
174 MHz to 790 MHz
at 50 Ω load, s < 1.4
X60C.1 This port can be
used as input
from TX_B in a
TX 1+1 system
or as an output to
TX_B in a single
or antenna 1+1
system.
GND Bidirectional X60C.2 GND / shield
Option Board Interfaces