Rohde & Schwarz TLx9 Series - Annex; A R&S Tlx9 Interface Description; Base Unit and Exciter; Gapfiller Board Interfaces; Overview

R&S TLx9 Interface Description
R&S
®
TLx9
63System Manual 2506.5060.02 ─ 03
Annex
A R&S TLx9 Interface Description
A.1 Base unit and Exciter / GapFiller Board Interfaces
A.1.1 Overview
Signal
Name/Description
Connection point Remarks
MAINS X1 Power supply AC input
LAN REMOTE X2 Remote LAN connection
LAN LOCAL X3 Front LAN local for 1HU or for 2HU with
option card
TX X6 TX connector (CAN bus, 12 V external,
position detection)
LAN LOCAL X7 Local LAN connection
TERMINAL SUPPLY X12 12 V, 1 A for external components (e.g.
RCB)
USB X14 USB port (for e.g. backup restore configu-
ration via USB stick)
TS1 IN X20 ASI input feeding
TS2 IN X21 ASI input feeding
TS MONITOR OUT X22 Transport stream / ASI monitor output
1PPS IN X23 1 PPS input
REF MONITOR X24 Reference monitor output (10 MHz or 1
PPS)
TS LAN1 X30 Transport stream Input feeding
TS LAN2 X31 Transport stream Input feeding
RF_OUT X60 RF output
RF_MON X61 RF monitor output
REF IN X64 10 MHz reference input
GPS ANT X66 GPS antenna input
DEMOD2 X68 RF input for demodulator (linear predistor-
tion)
Base unit and Exciter / GapFiller Board Interfaces