Rohde & Schwarz TLx9 Series - Exciter Board

Transmitter System R&S TLx9
R&S
®
TLx9
37System Manual 2506.5060.02 ─ 03
Figure 3-11: Backplane, example 2HU
3.1.4.10 Exciter Board
This board provides the TLx9 Exciter functions, depending on the HW fitting variant:
●
External (customer) interfaces
●
Video input signal handling
●
Channel coding
●
Generation of modulated OFDM signal
●
RF signal generation.
●
Reference and sync input signal handling
●
Regulation of P
A output power
●
Digital linear precorrection and non-linear PA precorrection
●
Control of power supplies
●
Control of redundancy switching
●
Different HW fitting variants:
– Advanced (2 x ASI input, 2 x TSoIP input, GPS and OCXO reference oscillator)
– GapFiller (1 x RF input and OCXO reference oscillator)
●
TCE901 (GPS and OCXO, dual inputs, TS monitoring, local LAN2, measurement
couplers, RF mon, PCIe SW, COFDM out, +13 dBm amp)
Design and Function – R&S TLx9