Transmitter System R&S TLx9
R&S
®
TLx9
47System Manual 2506.5060.02 ─ 03
3.1.4.23 LAN Switch Board
This board is offering 8 GBit Ethernet ports. T
wo LEDs per interface are for signaling
●
Connectivity / activity (green LED)
●
Valid Gigabit Ethernet connection (yellow LED)
Figure 3-24: LAN Switch Board
3.1.4.24 Local LAN2 Board
The Local LAN2 Board is a passive board to route the Local LAN network connection
from the Exciter / GapFiller Board via the Backplante to the Option Slot A (2 HU hous-
ing). This board is only used in 2HU device.
In 1HU devices a second local LAN is accessible at the front of the device. The 2HU
device is missing the second local LAN connection. The board is only used in Backup
TX systems.
Design and Function – R&S TLx9
To Next Page
Loading...
