Rohde & Schwarz ZVH8 - Measurement Selection and Configuration; Measurement Format Selection; Measurement Calibration

R&S ZVH Menu and Softkey Overview
Functions of the Cable and Antenna Analyzer
Operating Manual 1309.6946.12 - 09 206
7.2.5 Measurement Selection and Configuration
The MEAS key opens the measurement menu that contains functionality to select and
configure the measurement.
Transmission S21 is available only if you have installed option R&S ZVH-K39.
7.2.6 Measurement Format Selection
The FORMAT/SPAN key opens the span menu that contains functionality to select the
measurement format.
7.2.7 Measurement Calibration
The CAL key opens the calibration menu that contains functionality to calibrate the
R&S ZVH.