Rohde & Schwarz ZVH8 - Uploading Measurement Sets

R&S ZVH Working with the Measurement Wizard
Preparing the Measurement
Operating Manual 1309.6946.12 - 09 71
3.1.2 Uploading Measurement Sets
In order to perform the actual measurements, you have to upload the wizard definition
file that contains the set of measurements to the R&S ZVH.
► Select the "Wizard Set Control" function with the button.
The R&S ZVH opens a dialog box to select the measurement set(s) to upload.
► Select the measurement set you want to upload.
► Copy the files with the button.
The software stores a copy of the measurement set in the memory of the
R&S ZVH.
Alternatively, you can use a memory stick or SD card to access a measurement
set on the R&S ZVH.