Rohde & Schwarz ZVH8 - Amplitude Parameters; Sweep Configuration; Trace Functionality; Limit Lines

R&S ZVH Menu and Softkey Overview
Functions of the Network Analyzer (R&S ZVH-K42)
Operating Manual 1309.6946.12 - 09 213
7.4.4 Amplitude Parameters
The SCALE/AMPT key opens the amplitude menu that contains functionality to set up
the vertical axis of the measurement diagram.
7.4.5 Sweep Configuration
The SWEEP/BW key opens a menu that contains all functionality to configure the
sweep.
7.4.6 Trace Functionality
The TRACE key opens the trace menu that contains functionality to set up the traces.
7.4.7 Limit Lines
The LINES key opens a menu that contains the functionality to control limit lines.