Rohde & Schwarz ZVH8 - Functions of the Vector Voltmeter; Vector Voltmeter Measurements; Frequency Parameters; Amplitude Parameters

R&S ZVH Menu and Softkey Overview
Functions of the Vector Voltmeter
Operating Manual 1309.6946.12 - 09 215
7.5 Functions of the Vector Voltmeter
This section contains all softkeys and menus that are available in vector voltmeter
mode.
7.5.1 Vector Voltmeter Measurements
The MEAS key opens a menu that contains the functionality to configure
measurements with the vector voltmeter.
7.5.2 Frequency Parameters
The FREQ/DIST key opens a menu that contains the functionality to set the frequency.
7.5.3 Amplitude Parameters
The SCALE/AMPT key contains functionality to configure level parameters.
7.5.4 Sweep Configuration
The SWEEP/BW key opens a menu that contains functionality to configure the sweep.