Rohde & Schwarz ZVH8 - Functions of the Network Analyzer (R&S ZVH-K42); Measurement Configuration; Frequency Parameters; Measurement Format Selection

R&S ZVH Menu and Softkey Overview
Functions of the Network Analyzer (R&S ZVH-K42)
Operating Manual 1309.6946.12 - 09 212
7.4 Functions of the Network Analyzer (R&S ZVH-K42)
This section contains all softkeys and menus that are available in network analyzer
mode.
Vector network analyzer functionality is available only with option R&S ZVH-K42.
7.4.1 Measurement Configuration
The MEAS key opens the measurement menu that contains functionality to select and
configure the measurement.
7.4.2 Frequency Parameters
The FREQ/DIST key opens the frequency menu that contains functionality to set up
the horizontal axis of the measurement diagram.
7.4.3 Measurement Format Selection
The FORMAT/SPAN key opens the span menu that contains available measurement
formats.