R&S ZVH Operating the R&S ZVH
Using Antennas
Operating Manual 1309.6946.12 - 09 20
1.8 Using Antennas
You can use antennas, for example, to locate the source of interferers. The R&S ZVH
supports several antenna models.
● R&S HL300
Connected to the R&S ZVH at the AUX port and the RF input.
● R&S HE300
Connected to the R&S ZVH at the power sensor jack and the RF input.
● R&S HE400
Connected to the R&S ZVH at the power sensor jack and the RF input.
You can control the antenna functionality in several ways in the general setup of the
R&S ZVH. For more information see the Quick Start Guide of the R&S ZVH.
To Next Page
Loading...
