R&S ZVH Operating the R&S ZVH
Means of Input
Operating Manual 1309.6946.12 - 09 12
1.2.4 Using the Cursor Keys
Using the cursor keys, you can do several things.
● The cursor keys navigate through dialog boxes or softkey submenus.
● The up and down keys increase or decrease any kind of numeric value if an input
field is active.
The cursor keys change numeric values with a fixed step size.
● The up and down keys move markers around.
The step size is fixed.
● The left and right keys move the cursor in an input field in the corresponding
direction.
1.2.5 Remote Operation
Remote operation is a way to control the R&S ZVH from another device like a PC. To
use the R&S ZVH this way, you have to establish a connection between both devices
via the LAN or USB interfaces of the R&S ZVH.
The product range of the R&S ZVH provides several tools for remote operation.
Remote control with R&S ZVH-K40
The R&S ZVH-K40 is a firmware option to control the R&S ZVH with remote control
commands that are compatible to the SCPI standard.
You can download the user manual for the R&S ZVH-K40 from the R&S website.
Remote desktop with R&S ZVHView
The remote desktop is an application provided by the R&S ZVHView software. You can
use it to access and control the R&S ZVH in the R&S ZVHView environment.
While the R&S ZVH is running and connected to the control computer, the screen
contents and control elements (keys, softkeys etc.) are displayed. Thus, you can
operate the R&S ZVH just like the hardware itself.
► Connect the R&S ZVH to the control computer.
► Start the R&S ZVHView software.
► Press the "Remote Display" button ( ) in the user interface.
The software opens the remote display to operate the R&S ZVH remotely.
To Next Page
Loading...
