Rohde & Schwarz ZVH8 - Amplitude Parameters; Sweep Configuration and Bandwidth Selection; Trace Functionality

R&S ZVH Menu and Softkey Overview
Functions of the Spectrum Analyzer (R&S ZVH-K1)
Operating Manual 1309.6946.12 - 09 210
7.3.4 Amplitude Parameters
The SCALE/AMPT key opens the amplitude menu that contains functionality to set up
the vertical axis of the measurement diagram.
7.3.5 Sweep Configuration and Bandwidth Selection
The SWEEP/BW key opens a menu that contains all functionality to configure the
sweep including the bandwidths.
7.3.6 Trace Functionality
The TRACE key opens the trace menu that contains functionality to set up the traces.