To Next PageTo Next Page
Need help?Do you have a question about the Rohde TE Series and is the answer not in the manual?
Covers critical safety warnings regarding hot surfaces and electrical components.
Outlines safe operating procedures, maintenance, and electrical safety checks.
Details specific safety precautions for using exhaust air and inspection holes.
Highlights dangers of hot surfaces and infrared radiation near exhaust/inspection holes.
Guidelines for selecting a safe and suitable installation site for the kiln.
Step-by-step instructions for assembling the kiln and its components.
Covers connecting the power supply, controller, and extension rings.
Steps for connecting the kiln controller to the main unit.
Procedures and settings for the crucial initial firing of the kiln and furniture.
Important safety warning regarding the removal of protective foil before initial firing.
Advice on RCD usage and potential issues in specific environments.
Crucial safety and operational rules to follow during the firing process.
General guidelines for performing regular maintenance on the kiln.
Important information regarding heating element care, wear, and replacement.
Steps to diagnose and resolve power issues with the controller.
Advice on interpreting and resolving error messages shown by the controller.
Troubleshooting steps for issues where the kiln fails to reach operating temperature.
General
