46 / 161 - EN -
11. Declaration of conformity
We declare that the relevant and basic requirements of the Low Voltage Directive 2014/35/EU have been met.
Manufacturer: Helmut ROHDE GmbH
Ried 9
83134 Prutting
Germany
Person resident in the European
Community who is authorised to
compile the relevant technical
documents: Helmut ROHDE GmbH
Stefan Meier
Ried 9
83134 Prutting
Germany
The manufacturer of the product described below bears sole responsibility for issuing this declaration of conformity.
Description and identification of the product
Model: Toploader TE
Type: See section 2 “Product family”
Purpose: Electric kiln for daily use in the professional ceramics workshop.
We also declare that the special technical documents were created.
The protection goals of the following additional EU directives have been met:
2006/42/EC Machinery Directive
2014/30/EU Electromagnetic Compatibility Directive
The following harmonised standards were used, among others:
EN 60204-1:2019-06 Safety of machines, electrical equipment of machines, Part 1:
General requirements
EN IEC 60519-1:2020-12 Safety in electroheating systems and systems for electromagnetic
machining processes, part 1: general requirements
EN 60335-1:2020-08 Household and similar electrical appliances, Safety, Part 1:
General requirements
The technical documentation can be sent to a national authority following a justified request.
Prutting, April 20th, 2023 Benjamin Rohde (General Manager)
(Place and Date) (Signature)
To Next Page
Loading...
