131
Chapter 5 Applying Various Effects to the Sound
Reverb Effect
Reverb is an effect that adds a sense of spaciousness to the sound, creating
the illusion of playing in a large or small concert hall, a large or small room,
a small club, etc.
fig.05-16-1_70
1.
Press the Reverb [
▲
] or [
▼
] buttons to adjust the overall
Reverb amount.
When you press the up button [
▲
], additional Reverb is applied. Pressing
the down button [
▼
] decreases the Reverb level. If none of the Reverb
indicators are lit, the Reverb effect will not be heard.
When you press the Reverb [
▲
] [
▼
] buttons, the Part Balance Monitor
screen appears. In the Part Balance Monitor screen you can check the reverb
depth.
fig.01-27_55
Min
Max
Min
Max
Min
Max
Min
Max
Reverb SMF Rhythm Organ
Pedal
Orch
Accomp /
The Part Balance Monitor
screen is displayed for
several seconds and then
closes automatically.
If you touch <Hold>, the
screen continues to be
displayed until you touch
<Exit> again.
You can change the type of
reverb, the reverb depth for
each part, and the wall
type. For details refer to
“Changing the Reverb
Type” (p. 132), “Changing
the Depth of the Reverb”
(p. 134), and “Changing
the Wall Type” (p. 133).
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 131 ページ ２００４年９月８日 水曜日 午後５時４４分
To Next Page
Loading...
