150
Chapter 7 Recording/Playing Back What You Play
Viewing a Notation
You can display the notations of performances from music
files and recordings made on the AT-90SL. This is very
convenient when you want to read the music as you play and
to confirm recorded songs.
Selecting Songs
→
There is no need to select the song when displaying notations
for performances recorded with the Composer. Start from Step
5.
1.
Take the floppy disk containing the song whose
notation you want to display and insert it into the
floppy disk drive.
2.
Press the [Song] button.
The Song Select screen appears.
fig.07-31_50
3.
Touch < >< > to select the song whose
notation is to be displayed.
4.
Touch <Load>.
After the song is loaded, the Rec/Play screen opens.
Displaying Notations
5.
Touch <DigiScore> on the Rec/Play screen.
The Notation screen appears.
fig.07-
Touching the illustration of speaker on screen, you can
mute the part. This is convenient for muting a specific part
you want to practice. Touch the speaker icon once more
to have the sound play again.
Display
Explanation
Enlarge the notation display.
Display lyrics in the notation.
Display the Bass part notation.
Display the Lower part notation.
Display the Upper part notation.
Display the Upper part and Lower part
notations.
You can change the part that is displayed,
and change the way in which the notation
is displayed (p. 151).
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 150 ページ ２００４年９月８日 水曜日 午後５時４４分
To Next Page
Loading...
