Roland Atelier AT-90SL - Assigning a Name to a Registration Set

94
Chapter 3 Using the Registration Buttons
Assigning a Name to a Registration Set
When saving Registration sets, names like “Factory Reg.” will be assigned
by default, but you can assign a name that will help you later to identify the
contents of the Registration set.
1. Touch <Registration> on the Main screen.
The sub-window appears.
fig.03-04_55
2.
Touch <Save>.
The Registration Save screen appears.
fig.03-09_55
3. Touch <Utility> to open the Utility screen.
The Utility screen appears.
fig.03-10_55
When you touch <go to
Load>, the instrument
j
umps to the Registration
Load screen.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 94 ページ ２００４年９月８日 水曜日 午後５時４４分