Roland Atelier AT-90SL - Automatically Registering When You Switch Panel Settings

93
Chapter 3 Using the Registration Buttons
4.
Touch <Options>.
The Registration Options screen appears.
fig.03-07_55
5. Touch the Arranger Update setting to switch between
“DELAYED” and “INSTANT.”
Each time you touch the Arranger Update setting, it will alternate between
“DELAYED” and “INSTANT.”
6. Touch <Exit>.
Automatically Registering When You
Switch Panel Settings
When the [Manual] button is ON (lit), all panel settings you make will be
stored automatically in the [Manual] button as they are made, thus updating
the Registration that had been previously saved.
fig.03-08
Setting
Descriptions
DELAYED
When you press and hold a Registration button [1]–[12]
for several seconds, the settings for Rhythm and
Automatic Accompaniment will be recalled in addition to
the panel settings.
If you press and immediately release a Registration button
[1]–[12], only the settings that are not related to Rhythm or
Automatic Accompaniment will be recalled.
INSTANT
Settings for Rhythm and Automatic Accompaniment will
be recalled the instant that you press a Registration button
[1]–[12].
You can change the timing
of recalling the transpose
setting when you press a
Registration button.
For details refer to
“Changing the Timing at
Which Transposition
Settings are Recalled” (p.
191).
Write
23 5641
Manual
NOTE
The settings stored in the
[Manual] button will return
to their default values
when the power is turned
off.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 93 ページ ２００４年９月８日 水曜日 午後５時４４分