Roland Atelier AT-90SL - Delete the Recording from a Track (Delete Track)

167
Chapter 8 Editing Your Musical Performance Data
6.
Touch < >< > to set “From” (the first
measure that you wish to delete).
fig.08-05_50
7.
When you’re done making the settings, touch
<Exit>.
8.
Touch the “For” value (the number of measures
that you wish to delete).
9. Touch < >< > to set “For” (the number of
measures that you wish to delete).
To delete to the last measure, select “ALL.”
10.
When you’re done making the settings, touch
<Exit>.
11.
Touch <Execute>.
The following display appears.
fig.08-
To cancel operation, touch <Cancel>.
12.
Touch <OK> to delete the measures.
When deletion has been completed, you are returned to
the Delete Measure screen.
Delete the Recording from a
Track (Delete Track)
The AT-90SL has seven tracks. This function lets you delete
the recording from a track that you specify.
For more on the content stored on each track, refer to p. 145.
1.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
fig.08-02_50
2.
In the Rec/Play screen, touch < > (Utility) to
open the Utility screen.
fig.08-03_50
3.
In the Utility screen, touch <Edit>.
The Edit Menu screen appears.
fig.08-08_50
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 167 ページ ２００４年９月８日 水曜日 午後５時４４分