Roland Atelier AT-90SL - Wall Type and Reverb Depth Adjustment

132
Chapter 5 Applying Various Effects to the Sound
■ Changing the Reverb Type
By changing the reverberations of the notes, you can enjoy
the atmosphere of performance in a wide variety of different
locations. You can select from the following 11 types of
Reverb.
1.
Touch <Sound/Kbd> on the Main screen.
fig.05-08_50
The Sound/Keyboard screen appears.
2.
Touch <Effect>.
The Effect screen appears.
fig.05-17_50
3.
Touch < >< > to display the Reverb Type.
4.
Touch the value setting buttons for Reverb Type
to adjust the setting.
The following screen appears.
fig.05-18_50
5.
Touch < >< > to edit the setting.
NOTE
It is not possible to modify the delay time (delay interval)
when “DELAY” or “PAN DELAY” is selected.
6. Touch <Exit>.
Display
Description
ROOM 1 Simulates the reverb of a conference room
ROOM 2
Simulates the reverb of a performance
lounge
ROOM 3 Simulates the reverb of a large, open room
HALL 1 Simulates the reverb of a large concert hall
HALL 2 Simulates the reverb of a small concert hall
SMALL
CHURCH
The reverberation of a small church
LARGE
CHURCH
The reverberation of a large church
CATHEDRAL The reverberation of a cathedral
PLATE Applies a bright, metallic reverb
DELAY An echo-like sound repeated several times
PAN DELAY
Similarly to the above but where the
sound is panned between the left and right
speakers
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 132 ページ ２００４年９月８日 水曜日 午後５時４４分