Roland Atelier AT-90SL - Performing with a Human Voice

46
Chapter 1 Selecting and Playing Sounds
■ Performing with a Human Voice
In addition to sounds such as organ and piano, you can also play “human
voice,” which produces a vocal-like sound.
1. Press the [Alternate] button for the Part for which you wish
to specify a voice to select ON (lit) or OFF (dark).
The setting of the [Alternate] button: ON (lit) or OFF (dark), determines to
which of the two available locations a newly selected voice will be assigned.
2.
Press the [Others] button for the Part for which you wish to
specify a voice.
The Others Voice screen appears for several seconds.
fig.01-15
3.
Touch a button that shows a sound group.
fig.01-15
A sub-window appears, allowing you to select a sound group.
fig.01-16
For details on the Human
Voice that are available,
refer to “Voice List” (p.
220).
NOTE
When you press the
[Others] button, the Others
Voice screen appears in the
display screen, but the
Main screen will reappear
if you wait several seconds
without touching the
screen.
If you want to change the
voice for the [Others]
b
utton, press the [Others]
b
utton once more, then
select the voice by quickly
touching the screen while
the Others Voice screen
appears in the display.
Step 1 is unnecessary in the
case of Pedal Bass Part.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 46 ページ ２００４年９月８日 水曜日 午後５時４４分