Performance Lists
Backing Module BK-7m
r
41
12. Performance Lists
Performance/Music Assistant Info
The “Performance List” is a list of up to 999 Performance
memories. Each Performance memory contains a refer-
ence to the desired Music Style or song and all settings
you want to load along with that Music Style or song
(see “‘Performance Edit’ parameters” on p. 50), including
settings like INTRO/ENDING status, selected VARIATION,
etc.
The Performance memories you create are saved to the
selected “Performance List”. This allows you to prepare
one set of Performance memories for weddings, another
for corporate events, a third for anniversaries, etc. Per-
formance Lists always reside on a USB memory.
It is perfectly possible to program several Performance
memories for one song. Selecting a Performance mem-
ory is a lot faster than calling up one of the BK-7m’s
functions, modifying the settings, etc., while playing.
You could program one Performance memory for the
first part of a song, another for the bridge and a third
one for the closing section. Doing so allows you to “play”
with the effect settings of the various processors, for
example.
NOTE
The BK-7m is supplied with one Performance List called “Music
Assistant”. This list cannot be deleted or edited.
Loading a Performance/Music
Assistant List
1.
Switch on the BK-7m.
See page 19.
2.
Connect an optional USB memory to the
BK-7m.
This step is unnecessary if you want to use the “Music
Assistant” list, because that list resides in the BK-7m’s
internal memory.
3.
Press the PERFORMANCE [LIST] button.
The display now shows all Performance Lists it found
on the USB memory. (The internal “Music Assistant”
list is always displayed in the top line.)
NOTE
If you already loaded a Performance List, the display imme-
diately displays the Performance memories it contains. To
load a different Performance List from the USB memory,
press the PERFORMANCE [LIST] button again and proceed
with step (4) below.
NOTE
If the USB memory contains no Performance List files, or if
the memory is not connected (properly), the BK-7m only
displays the “Music Assistant” list.
4.
Rotate the [CURSOR÷VALUE] dial to select
the Performance List you want to use.
5.
Press the dial to confirm your selection.
(In our example, we selected the “Music Assistant”
list.) The display changes to:
6.
If necessary, rotate the [CURSOR÷VALUE]
dial to select the “Load” option, then press
the dial.
The display shows the Performance memories to
which the selected list refers.
You can now select a Performance memory (see
below).
If you need to load another Performance List, press
the PERFORMANCE [LIST] button again.
PERFORMANCE
LIST
BK-7m_UK.book Page 41 Tuesday, January 4, 2011 9:25 AM
To Next Page
Loading...
