‘Global’ parameters
Backing Module BK-7m
r
65
Pedal Controller FC-7
This setting is found on the display page that can be
selected using [MENU] button‰ “Global” ‰ “Pedal
Controller FC-7”.
The following table shows the functions you can
assign to each of the FC-7’s footswitches.
See “Pedal” on p. 64 for an explanation of the avail-
able options.
Save Global
This function allows you to save all “Global” parameter
settings to ensure that they are loaded automatically
each time you switch the BK-7m on.
You can select this function using [MENU] button ‰
“Global” ‰ “Save Global”.
1.
Rotate the [CURSOR÷VALUE] dial to select
“YES”, then press the dial to define the cur-
rent settings as the default state.
The display shows a confirmation message.
If you don’t want to define the current “Global” set-
tings as the default state, rotate the [CURSOR÷VALUE]
dial to select “NO”, then press the dial. The BK-7m
then returns to the “Performance Edit” page.
Intro
Ending
Variation1
Variation2
Variation3
Variation4
Bass Inversion
Same functions as the [INTRO],
[ENDING], [VARIATION1],
[VARIATION2], [VARIATION3],
[VARIATION4], [BASS INV], buttons.
See “Using Music Styles” on p. 30.
Arranger Hold Allows you to switch the Arranger
Hold function on and off. See
page 60.
Arranger Chord
Off
Allows you to switch the Arranger’s
chord recognition off, in which case
only the drum/percussion playing.
Perf. Next
Perf. Prev
Allows you to select the next or pre-
vious Performance.
Portamento Switches the Portamento function
on and off. See page 52.
Hold
Soft
Sostenuto
The assigned footswitch can be used
as a Soft, Sostenuto or Sustain (Hold
pedal).
Track Mute Same function as the [TRACK MUTE]
button.
Break Mute When you press the footswitch,
Music Style playback is muted for
the remainder of the current mea-
sure.
Reset/Start This function allows you to have the
BK-7m start on the first beat of the
currently selected Music Style pat-
tern when you press the assigned
footswitch. Use it when you are
accompanying a singer or soloist
whose timing is a little shaky and
suddenly notice that the playback
lags one or two beats behind the
singer/soloist.
AudioXfade The footswitch can be used to acti-
vate a crossfade between two files.
To make this work, select a different
song while the current song is being
played back and press the foot-
switch. The BK-7m creates a brief
blend between the current and the
next song. (This function is only
available between two audio songs.)
Fade Out This function gradually decreases
the volume until reaches zero. At
that time, song or Style playback
stops automatically.
Function Explanation
ChordRecOff While you are holding down the
footswitch, the BK-7m does not scan
the incoming note messages for
chord information. Those messages
are therefore only transmitted to the
active real-time parts (UP1, UP2,
LWR, MBS). Release the footswitch
to once again activate chord recog-
nition.
FC-7 Switch Function
1
Start/Stop, Intro, Ending, Variation1,
Variation2, Variation3, Variation4, Bass
Inversion, Arranger Hold, Arranger Chord
off, Perf. Next, Perf. Prev, Portamento,
Hold, Soft, Sostenuto, Track Mute, Break
mute, Reset/Start, AudioXfade, Fade Out,
ChordRecOff
2
3
4
5
6
7
Function Explanation
BK-7m_UK.book Page 65 Tuesday, January 4, 2011 9:25 AM
To Next Page
Loading...
