14
Installing the Driver
11 When the installation is completed, the “A-PRO Driver Setup” dialog
box will indicate “Installation has been completed.”
Click [Close] to close the “A-PRO Driver Setup” dialog box.
If the “System Settings Change” dialog box appears, click [Yes]. Windows will
automatically restart.
Now let’s check to make sure that installation was successful.
➝ “Checking with a SONAR Soft Synths (Windows)” (p. 19)
A-300_500_800C_e.book 14 ページ ２０１０年２月２２日 月曜日 午後９時１３分
To Next Page
Loading...
