Roland D-05 - Transferring Patches To and From the D-50;550; Transferring Patches from the D-50 to the D-05; Transferring Patches from the D-50;550 to the D-05

22
Transferring Patches To and From the D-50/550
4-1. Press the [FUNCTION] button.
Function Menu
(Func) (MIDI)
4-2. Press the [ ] button to access the (B.Dump) (B.Load)
screen.
Function Menu
(B.Dump)(B.Load)
4-3. Hold down the [SHIFT] button and press the [F2] button.
BulkLoad.O Sure?
[EXIT]:N [ENT]:Y
4-4. Press the [ENTER] button.
Read this material together with the D-50/550 Owner’s Manual.
5. Put the transmitting unit in the transmit-ready
condition.
Operations on the D-05
From U1–U8, select the group that you want to transfer.
* P1–P6 cannot be transferred.
5-1. Press the [FUNCTION] button.
Function Menu
(Func) (MIDI)
5-2. Press the [ ] button to access the (B.Dump) (B.Load)
screen.
Function Menu
(B.Dump)(B.Load)
5-3. Hold down the [SHIFT] button and press the [F1] button.
BulkDump.O Sure?
[EXIT]:N [ENT]:Y
5-4. Press the [ENTER] button.
Read this material together with the D-50/550 Owner’s Manual.
Transferring Patches from the D-50 to the D-05
Patches (64 patches) bulk loaded from the D-50 to the D-05 are
temporarily transferred to the patch bank that includes the
current patch.
Currently Patch Sample
0
Destination Patch Bank Sample
U1-11: Fantasia
0
User1-11–User1-88
U6-88: Big Wave
0
User6-11–User6-88
5 The patches (64 patches) originally residing in the bulk load
destination will appear to have been overwritten.
5 Patches saved to memory cards used with the D-50 (M-256D)
cannot be transferred directly from these memory cards to the
D-05. First, transfer the patch data to the D-50 from the memory
card (M-256D), then transfer the patch data from the D-50 to
the D-05.
1
1
2
3
4
5
6
7
8
2 3 4 5 6 7 8
Number
Bank
D-05:User1
1
1
2
3
4
5
6
7
8
2 3 4 5 6 7 8
Number
Bank
D-50
1
1
2
3
4
5
6
7
8
2 3 4 5 6 7 8
Number
Bank
M-256D
Transferring Patches from the D-50/550 to the D-05
* You cannot bulk load data when a patch in the Preset Banks
(P1 – P6) is selected.
* The D-05 display does not change immediately following the
bulk load. You can conrm the outcome of the transfer by
switching patches.