Roland GO:KEYS 3 - Formatting a USB Flash Drive (Format)

50
Convenient functions (Utility)
Formatting a USB ash drive (Format)
Here’s how to initialize a USB ash drive.
NOTE
If the USB ash drive contains important data, be aware that this
operation erases all data from the media.
1.
Connect the USB ash drive to the USB memory port.
2.
On the Utility Menu screen, select “Format” and press
the [enter] button.
A conrmation message appears.
3.
Use the cursor [ÌÌ] [ÊÊ] buttons to select “OK”, and press
the [enter] button.
If you decide to cancel, select “Cancel” and press the [enter] button.
Once initialization is nished, the message “Completed” is shown
and the display returns to the Utility Menu screen.
*
Never turn o the power or remove the USB ash drives while the
screen indicates “Executing...”.
*
When initialization is nished, the necessary folders to use the
GO:KEYS are created on the media.
USB ash drive folder architecture
ROLAND
BACKUP
(folder for backups)
CHORD_PTN
(folder for chord patterns)
SOUND
(folder for tones and scenes)
STYLE
(folder for styles)
SONG
(folder for audio songs)