Roland GO:KEYS 3 - Page 75

75
Editing the system settings
91 91 Flanger>Dly Flanger>Dly (Flanger (Flanger ÓÓ Delay) Delay)
L in
R in
Balance D
Balance D
L out
R out
Balance
Balance
Feedback
Balance D
Balance D
Balance W
Balance W
Feedback
Flanger
Delay
Parameter Value Explanation
Delay Feedback -98–+98 [%]
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative
(-) settings will invert the
phase.
Delay Balance
D100: 0W–D0:
100W
Adjusts the volume balance between
the sound that is sent through the
delay
(W) and the sound that is not sent
through the delay (D).
92 92 Chorus->Fl Chorus->Fl (Chorus (Chorus ÓÓ Flanger) Flanger)
L out
R out
Balance D
Balance D
Balance W
Balance W
Feedback
Balance D
Balance W
Balance W
Balance D
L in
R in
Chorus Flanger
Parameter Value Explanation
Chorus Rate
(Hz) 0.05–10.00 [Hz]
Modulation frequency of the chorus
effect
Flanger Rate
(Hz) 0.05–10.00 [Hz]
Modulation frequency of the flanger
effect
93 93 JD MultiJD Multi
Recreates the eects included in group A of the JD-800.
L out
R out
L in
R in
SpectrumDistortion Phaser Enhancer
Parameter Value Explanation
Phaser Rate 0.1–10.0 [Hz] Frequency of modulation
Phaser Mix 0–100
Sets the level of the phase-shifted
sound.
Note
Display Explanation
1/64T Sixty-fourth-note triplet
1/64 Sixty-fourth note
1/32T Thirty-secondnote triplet
1/32 Thirty-second note
1/16T Sixteenth-note triplet
1/32.
Dotted thirty-second
note
1/16 Sixteenth note
1/8T Eighth-note triplet
1/16. Dotted sixteenth note
1/8 Eighth note
1/4T Quarter-note triplet
1/8. Dotted eighth note
1/4 Quarter note
1/2T Half-note triplet
Display Explanation
1/4. Dotted quarter note
1/2 Half note
1T Whole-note triplet
1/2. Dotted half note
1 Whole note
2T Double-note triplet
1. Dotted whole note
2 Double note