Roland HandSonic HPD-20 - Page 9

What is the HandSonic? Quick Guide Frequently Used Functions Parameter Guide Appendix
Panel Descriptions
9
PHONES jack
Connect headphones
(sold separately) here.
Even if headphones are con-
nected, sound will still be output
from the OUTPUT jacks.
HH CTRL jack
Connect a hi-hat control pedal
(sold separately) here. You can
use your foot to open/close
the hi-hat sound, or to modify
a sound.
OUTPUT jacks
These jacks output the sound. Connect
them to amplied speakers etc. (sold
separately). If you’re outputting in
monaural, connect only the
L/MONO jack.
TRIG IN jack
Connect an external expansion pad (sold separately)
here. You can connect a kick pad and use your foot to
play sounds, or add a bar trigger pad.
MIX IN jack (stereo)
By connecting a digital audio player
or other audio source here, you can
play the HandSonic while listening to
a song.
The sound that’s input to this jack will
be output to the OUTPUT jacks and
the PHONES jack.
FOOT SW jack
Connect a footswitch (sold separately)
here. You can use your foot to control
a variety of functions.
* You must make at least one of these connections in order to hear
the sound.
Security slot( )
http://www.kensington.com/
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any
connections.
p. 43p. 40p. 42
or