15
Connecting to a Computer
MIDI Window USB MIDI Tab
Parameter Description
DEVICE ID
Sets the M-5000’s device ID.
This is setting is shared by MIDI and USB MIDI.
CONTROL CHANGE (FADER, MUTE)
RECEIVE When this is on, control changes are received.
SEND When this is on, control changes are sent.
PROGRAM CHANGE (SCENE)
RECEIVE When this is on, program changes are received.
SEND When this is on, program changes are sent.
MMC (USB MEMORY RECORDER)
RECEIVE When this is on, MMC commands are received.
SYSTEM EXCLUSIVE (RCS Control)
RECEIVE
When this is on, System Exclusive messages are
received.
SEND
When this is on, System Exclusive messages are
sent.
To Next Page
Loading...
