Roland M-5000 - USING THE UNIT SAFELY; Power Cord and Grounding Safety; Handling, Repair, and Impact Safety

4
About M-5000 RCS
Online Mode/Oine Mode
Online Mode
You use the online mode when connecting the M-5000 to a computer and operating the M-5000 remotely.
* When you’re operating in the online mode, project les cannot be saved using M-5000 RCS. You use the M-5000 to save project les.
USB
LAN/Wireless LAN
Entering the Online Mode
1. Connect the M-5000 and the computer.
0
“Connecting to a Computer” (p. 8)
2. Click [ONLINE].
The Online popup appears.
3. Click [Unit Name].
A pull-down menu appears.
If the desired M-5000 unit is not shown on the list, click [Refresh] to rescan.
4. Select the M-5000 unit to operate remotely.
When multiple M-5000 units are connected, change the wireless IDs for the M-5000 units to give each one a dierent device name.