Roland M-5000 - Differences in Operation between M-5000 RCS and the M-5000; Overall; When in the Online Mode; When in the Offline Mode

26
Dierences in Operation Between M-5000 RCS and the M-5000
Overall
5 In M-5000 RCS, monitoring the M-5000’s audio signals is not possible.
5 The [ALL] button is displayed only at screens where it can be used.
5 “SET ANCHOR” is the only available function in the function mode.
5 The console cannot be locked to prevent operation.
5 The M-5000 cannot be updated.
5 Pressing and holding the [DISP] button in the user assignable section does not enable the assign mode.
Screens Where No Operation Is Possible
5 NETWORK window
5 FADER CALIBRATION window
5 SYSTEM INFORMATION window
Parameters That Cannot Be Manipulated
5 [ALL] button on the HOME screen
5 <SENSITIVITY> and <CALIBRATE TOUCH SENS> in the PANEL window
5 <ON FADER> in the GEQ window
5 <MORE> in the M-48 MANAGER window (SAVE M-48 PROJECTS/LOAD M-48 PROJECTS/UPDATE ALL M-48)
5 <ON FADER> in the M-48 SETUP window
5 <NETWORK> and <REMOTES> in the INITIALIZE window
5 <DATE> and <TIME> in the DATE & TIME window
5 <FORMAT> in the PROJECT window
When in the Online Mode
Screens Where No Operation Is Possible
5 PROJECT window
5 MIDI window
When in the Oine Mode
When in the oine mode, a virtual M-48 unit called “Virtual” is displayed in the M-48 list.
5 You can use “Virtual” to practice how to use the M-48 MANAGER and M-48 SETUP windows.
5 You can store the settings for “Virtual” in an M-48 library and recall them on actual M-48 units.
Parameters That Cannot Be Manipulated on “Virtual”
5 Editing the M-48’s memory
5 Saving or loading project les
5 Muting output
5 Flashing the M-48’s LEDs