Roland M-5000 - Connection over a Wired LAN or Wireless LAN Via a Wireless LAN Router; Connecting the M-5000 and Wireless LAN Router Using a LAN Cable; Making a Wireless Connection between the M-5000 and Wireless LAN Router

11
Connecting to a Computer
Connection over a Wired LAN or Wireless LAN via a Wireless LAN Router
This connects the M-5000 and computer via a wireless LAN router.
Operating the M-5000 remotely using M-5000 RCS requires connecting the computer and the M-5000 to the same network.
For information on how to connect the computer and the wireless LAN router, refer to the documentation for the respective devices.
Connecting the M-5000 and Wireless LAN Router Using a LAN Cable
1. Use a network cable to connect the M-5000’s LAN port and the wireless LAN router.
2. At the LAN SETUP window (p. 13), tap <CONFIGURE>.
A popover appears.
3. Tap <AUTO (DHCP)>.
4. Tap <OK>.
DHCP is enabled.
5. Enable DHCP-server functionality on the wireless LAN router.
For details, refer to the documentation for the wireless LAN router.
Making a Wireless Connection Between the M-5000 and Wireless LAN Router
1. Connect a wireless USB adapter (WNA1100-RL, available separately) to the M-5000’s USB WLAN ADAPTER connector.