28
Step 4.+Create tool path
Set the margin
K Click the ‘-’ position as below to expand the Modelling Form.
L Click [Automatic], the automatic value is relative to the tool diameter, plus a margin.
M Click [Apply]
N Click [Close]
12
K
L
K
L
M
N
Generating cutting data
KClicking [ ] generates
the toolpaths sequentially.
LThe toolpath generation progress is shown as a
percentage.
MWhen tool path generation is complete, the
display changes to [Created]
13
K
L
M
Check the cutting data
Click
+
+++++++++++++++++++++
K Click [Preview].
The cutting progress is simulated.
L1Click [Show model].
The completed model is displayed.
From menu, select [File] – [Save as ] ( or [Save])
and save the Whole project.
14
To Next Page
Loading...
