Roland Metaza MPX-90M - Instrument Preparation and Requirements

26
Chapter 2 Printing
2-1 Preparing for Printing
Getting Started: Checking Print Workow
Preparing the MPX-90M machine
Switch on the power of the machine and select it as the output destination for the computer.
 P. 27, "STEP 1: Switching On the Power," p. 28, "STEP 2: Specifying Output Destination for METAZAStudio"
Preparing an instrument to be imprinted
Check the several conditions for thickness, hardness, and the like that an instrument to be imprinted
needs to meet.
 P. 28, "STEP 3: Preparing Instrument to be Imprinted"
Preparing print data
Create print data mainly using CSV les.
 P. 30, "STEP 4: Preparing Print Data"
Starting printing
Set the instrument to be imprinted in the machine and output print data from METAZAStudio.
 P. 35, "STEP 1: Loading the Instrument to be Imprinted" p. 43, "STEP 2: Making Prints"