Roland Metaza MPX-90M - 4-3 When Moving the Machine; Securing the Machine for Transport

80
Chapter 4 Appendix
4-3 When Moving the Machine
Attaching retainers
When moving the machine, be sure to attach the retaining materials. Moving the machine without attaching
the retaining materials may result in damage to the machine.
Procedure

Switching on the power.
 P. 27, "STEP 1: Switching On the Power"

Remove the vise (or the table).

Attach the head cap.

Switching off the power.
 P. 45, "STEP3: Finishing Printing (Switching Off the Power)"

Hold down the Power/Movement button for
ten seconds or longer.
The head moves as shown in the gure.
Power / Movement button
Hold the head.
Head
Head cap