Roland Metaza MPX-90M - STEP 1: Switching on the Power

27
Chapter 2 Printing
2-1 Preparing for Printing
STEP 1: Switching On the Power
Procedure

Open the cover and loosen the head's
stopper.

Press the Power/Movement button.
The Head moves to the left rear, and the lamp of the
Power/Movement button is turned ON. This opera-
tion is called initialization.
When the power lamp remains blinking
An initialization error. Loosen the stopper of the head, and then press the Power/Movement button.
The error is cleared, and the power lamp is lit.
Power/Movement button
Tighten
Stopper