Roland Metaza MPX-90M - STEP 3: Finishing Printing; Powering Down the Machine

45
Chapter 2 Printing
2-2 Starting Printing

Click [OK].
Printing of the next page starts.
* Depending on the type of your scanner, it may be unable to read the 2D symbol imprinted by the machine,
because it is unsuitable for the 2D symbol. For information on scanners suitable for the machine, consult
your authorized Roland DG Corp. dealer or us.
When you wish to print only the record being displayed:
Click .
The [Print] dialog box appears.
The number (page number) of the record being displayed in METAZAStudio is specied as the page for
[Print Range]. Specify [Material] and [Copies] as necessary and click [OK] to start printing.
STEP 3: Finishing Printing (Switching Off the Power)
Hold down the Power/Movement button for
one second or longer.
The light goes dark and the power is switched o.
Power/Movement button