43
Chapter 2 Printing
2-2 Starting Printing
Press the Power/Movement button.
The head moves to the left rear.
Detach the head cap.
STEP 2: Making Prints
After you complete "Preparing for Printing" and "Loading Instrument to be Imprinted," printing starts.
P. 26, "2-1 Preparing for Printing," p. 35, "STEP 1: Loading the Instrument to be Imprinted"
Procedure
Click .
The [Print] dialog box appears.
Power/Movement button
Support the head
Head cap
Putting your ngers on the
projecting rim of the head
cap eases removal.
To Next Page
Loading...
