58
4-1 More Advanced Operations
Chapter 4 Appendix
Click .
The [Properties] dialog box appears.
If the drawing area for the 2D symbol is not selected, you cannot click
. If you cannot click , click
and then click (select) the drawing area for the 2D symbol.
Make the settings for properties including [Size] of the 2D symbol.
For details on each setting, refer to the help for METAZAStudio ([Commands] - [Object] menu - [Proper-
ties] - [Properties] dialog box).
P.23, "How to display help for software"
After making the settings, click [OK].
Now the print data is prepared. Go to "STEP 1: Loading the instrument to be imprinted" in P. 35.
If you click [Change] in the [2D Symbol]
tab, the [Code Input] dialog box appears.
Using the [2D Symbol] le you create
directly in METAZAStudio, you can create
a le with a dierent code.
To Next Page
Loading...
