23
Chapter 2 Preparation
2-2 Installation
Installation Environment
WARNING
Never install in a location exposed to water or to gasoline, thinner, or any other
flammable material.
Current leakage may cause electrical shock, electrocution, or combustion and fire.
WARNING
Never place gasoline, alcohol, thinner, or any other flammable material near the
machine. Also, never use an aerosol spray near the machine.
Doing so may cause fire.
WARNING
Never operate in a location such as one near an open flame or heater, or where
sparking or static electricity may occur.
Cuttings or the like may ignite and cause fire.
CAUTION
Install on a stable surface.
Failure to do so may result in the unit tipping over, leading to injury.
Unsuitable Installation Sites
➢ Locations subject to large fluctuations in temperature or humidity
➢ Locations subject to shaking or vibration
➢ Locations where the floor is tilted, not level, or unstable
➢ Dusty locations
➢ Locations exposed to direct sunlight or near air-conditioning or heating equipment
➢ Locations exposed to considerable electrical or magnetic noise, or other forms of electromagnetic energy
Installation Space
700 (W) x 800 (D) x 600 (H) mm (28 (W) x 32 (D) x 24 (H) in.)
To Next Page
Loading...