Roland Modela MDX-40 - Powering the System On and Off

Chapter 3 Operation
28
3-1 Switching the Power On and Off
Starting the System
1. Start the machine.
➊
Close the front cover.
➋
Switch on the main power switch.
The POWER light comes on.
➌
Press the Sub power button.
The machine starts up, and initialization is performed.
After initialization ends, the MODELING light and the VIEW light
comes on and the machine is paused.
➍
Press the VIEW button.
The view state is canceled, and the machine finishes preparations
for receiving cutting data.
Front cover