Roland Modela MDX-40 - Specifications; Main Unit Specification

Chapter 5 Appendix
46
5-4 Specifications
Main Unit Specification
Acceptable material
X, Y, and Z operation strokes
Distance from spindle tip to table
Table size
Loadable workpiece weight
XYZ-axis motor
Feed rate
Software resolution
Mechanical resolution
Spindle motor
Spindle type
Spindle rotation
Tool chuck
Interface
Power supply
Power consumption
Acoustic noise level
Dimensions
Weight
Packed dimensions
Packed weight
Operation temperature
Operation humidity
Accessories
MDX-40
Resins such as chemical wood and modeling wax(metal not supported)
305 (X) x 305 (Y) x 105 (Z) mm (12 (X) x 12 (Y) x 4-1/8 (Z) in.)
Maximum 125 mm (4-15/16 in.)
305 (W) x 305 (D) mm (12 (W) x 12 (D) in.)
4 Kg (8.8 lb)
Stepping motor
XY-axis : 0.1 to 50 mm/sec. (0.0039 to 1.9 in./s)
Z-axis : 0.1 to 30 mm/sec. (0.0039 to 1.1 in./s)
0.01 mm/step (0.00039 in./step)
0.002 mm/step (0.0001 mm/step)
DC brushless motor, Maximum 100W
Modeling spindle
4500 to 15000 rpm
Cutter holder (4.36 mm)
USB connector, sensor connector, expansion connector
AC100 to 240 ± 10 %, 50/60 Hz
2.1 A
Approx. 210W
No-load operation : 56 dB (A) or less, standby : 42 dB (A) or less (According to
ISO7779)
669 (W) x 760 (D) x 554 (H) mm (26-3/8 (W) x 29-15/16 (D) x 21-13/16 (H) in.)
66 Kg (146 lb)
785 (W) x 885 (D) x 735 (H) mm (31 (W) x 35 (D) x 29 (H) in.)
73 Kg (161 lb)
5 to 40˚C (41 to 104˚F)
35 to 80 % (no condensation)
Power cord, collet, sensor, hexagonal wrench, hexagonal screw drivers, span-
ners, Roland Software Package CD-ROM, MODELA Player4 CD-ROM, user's
manual, Roland Software Package installation and setup guide, MODELA Player4
installation and setup guide
Voltage and frequency
Required power capacity