4-2 Installing the Engraving Cutter
Chapter 4 Feature Reference
39
➎
Lower the spindle and bring the tip of the collet close to
the surface of the workpiece.
➏
Insert the cutter.
➐
Making the tip of the cutter touch the surface of the
workpiece, and tighten the tool retaining screw.
➑
Using the operation panel screen, select
[Set the Z origin here].
Click [Set].
The Z origin has now been set.
Hexagonal screw driver
(small)
Tool retaining screw
Cutter
To Next Page
Loading...